Ø 150 Gauge, Aluminium, Tight or Oil-filled.
Ø 150 Gauge, Aluminium, Tight or Oil-filled
Construction features
- Connection: vertical or rear, brass
- Light alloy case, hammered gray epoxy coating
- Glass Polymetacrylate
- Glass fastening by collar
- Manometric element:
- material: tombac
- assembly: tin solder
- Zeroing screw accessible from the outside
- Brass amplifier mechanism
- Housing filled with silicone oil for the Oil-filled version
- Security vent (only Tight version)
Threads
- M10x100 - 15x150 - 20x150
- 1/8 GAZ co.
- 1/4 GAZ cyl. - 3/8 GAZ cyl. - 1/2 GAZ cyl.
- 1/8 BRIGGS co. - 1/4 BRIGGS co. - 1/2 BRIGGS co.
- Other threads: contact us
Fixings
- By mounting bracket (surface mounting)
- By fastening clamp (through mounting)
Accessories
- Nut, socket & seal
- Plastic storage case, with protective foam
Services
- Calibration or re-calibration with 6 point certificate, Retracable to a COFRAC or BELAC attached national standard.
- Repair Services
Technical specifications
- Accuracy :
- Industry: ± 1% end of scale: Class 1
- Laboratory: ± 1% of reading (maximum scale 100 bar)
- Verification: ± 0.5% of reading (maximum scale 50 bar)
- Operating temperature: - 40 + 70 ° C
- Accidental pressure:
- 200% for scales below 50 bar
- 150% for scales between 50 and 100 bar
- 125% for scales over 100 bar
- Range of the scale: 300 °
- List of available dials: see attached table
Options
- Silver solder assembly (for temperatures above 70°C)
- Stainless version (max. scale 60 bar) Manometric element and all parts in contact with the fluid in stainless steel
- Absolute Calibration
- Oxygen version (only in version «Tight»)
- Vacuum drying of the manometric element
- Filling of the pressure element with buffer fluid: glycerin, only type «Industry»
- Security vent
- Zeroing screw equipped with knurled knob (only in version «Tight»)
- Maximum indicator system by follower needle (only in type «Industry» version «Tight»)
- Index needle (only in version «Tight»)
- Overload stop
- Serialnumber printed on the dial
- Custom dial at the customer’s request