Ø 100 Manometro, Composito, Ermetico o Bagno d’Olio.
Ø 100 Manometro, Composito, Ermetico o Bagno d’Olio
Construction features
- Connection: vertical side or rear central brass
- Housing in reinforced composite material, blue, red or yellow
- Glass Polymetacrylate
- Glass fixation: by collar
- Manometric element:
- material: tombac
- assembly: tin solder
- Zeroing screw accessible from the outside
- Brass amplifier mechanism
- Housing filled with silicone oil for the Oil-filled version
- Overload vent (only Tight version)
Threads
- M10x100 - M15x150 - M20x150
- 1/4 GAS co.
- 1/8 GAS cyl. 1/4 GAS cyl. - 3/8 GAS cyl. - 1/2 GAS cyl.
- 1/8 BRIGGS co. - 1/4 BRIGGS co. - 1/2 BRIGGS co.
- 1/4 SAE
- Other threads: contact us
Fixations
- By mounting bracket (surface mounting)
- By fastening clamp (through mounting)
Accessories
- Nut, socket & seal
- Plastic storage case, with protective foam
Services
- Calibration or re-calibration with 6 point certificate, Retracable to a COFRAC or BELAC attached national standard.
- Repair Services
Technical specifications
- Accuracy:
- Industry: ± 1% end of scale: Class 1
- Laboratory: ± 1% of reading (only in «Tight» version)
- Operating temperature: - 40 + 70 ° C
- Accidental pressure:
- 200% for scales below 50 bar
- 150% for scales between 50 and 100 bar
- 125% for scales over 100 bar
- Range of the scale: 300 °
- List of available dials: see catalogue
Options
- Silver solder assembly (for temperatures above 70°C)
- Stainless version (max. Scale 100 bar) Manometric element and all parts in contact with the fluid in stainless steel 316L
- Absolute Calibration
- Oxygen version
- Vacuum drying of the manometric element
- Filling of the manometer element with buffer fluid: glycerine, only «Industry» type
- Zeroing screw equipped with knurled knob
- Maximum indicator system with follower needle, only for type «Industry, Dry/Tight»
- Index needle, only for type «Dry/Tight»
- Overload stop
- Serialnumber printed on the dial
- Custom dial at the customer’s request